MSDS

 

EndoCube MSDS

 

Description

 

Endocube is an inner enclosure containing a high-grade food safe substitute inside an outer enclosure that forms an air barrier within. This construction will simulate an average small food sample in a pre-packed condition.

Endocube consists of:-

 

  • Endocube and bayonet fixing (male)
  • two-part cable trap (termination)
  • bayonet fixing plate (female)
  • locking ring

 

Composition

  1. Wax blend 2241
  2. Grade 3154 FP (Food Packaging Grade)

 

Dimensions:-

  • Length: 4.5 cm – 7.5 cm with bayonet and 2 part cable trap
  • Width: 4.5 cm

 

SHELL MICRCRYSTALLINE WAXES Properties LMP Test method
Congelating point degC 62-66 ASTM-D 938
Penetration at 25 degC mm (a) ASTM-D1321
Penetration at 43 degC mm 70-160 ASTM-1321
Colour lovibond (6 inch cell) max 1.5 IP17B
Odour max 1 ASTM-D1833
Oil content % m/m max 1 ASTM-D 721
U.S. Food & Drug Administration- paragraph 172.886

– paragraph 178.3710

 PassPass
Statutory instruments 1966/1073 Pass
Statutory instruments 1978/1927 Pass
German Federal Law Gazette 1972Amended: 24-12-1977 Pass
German Health Authorities Regulation, Art. XXV, 1975 modified by communication 38 of 29-7-1976 Pass